Barrina LED LIGHTING 12=B Reading Barrina LED LIGHTING 4=C 3 minutes Next Barrina LED LIGHTING 5=H

Product information sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light  sources

Supplier’s name or trade mark:

Barrina

Supplier’s address:

89 Princess Street,Manchester,M1 4HT,UK

Model identifier:

INWT80200665Ic

Type of light source:

LED

Light source cap-type:

Connection by wire

Lighting technology used:

LED

Non-directional or directional:

NDLS

Mains or non-mains:

MLS

Connected light source (CLS):

No

Colour-tuneable light source:

No

Envelope:

No

High luminance light source:

No

 

 

Anti-glare shield:

No

Dimmable:

No

Product parameters

Parameter

Value

Parameter

Value

General product parameters:

Energy consumption in on-mode (kWh/1 000 h)

36

Energy efficiency class

F

Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere (360°), in a wide cone (120°) or in a narrow cone (90°)

3600lm in a sphere (360°)

Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be

set

3000/4000/5000

On-mode power (Pon), expressed in W

36

Standby power (Psb), expressed in W and rounded

to the second decimal

-

Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal

-

Colour rendering

index, rounded to the nearest integer, or the range of CRI

values that can be set

86

Outer dimensions without separate control gear, lighting control parts and nonlighting control parts, if any

(millimetre)

Height

23.5

Spectral power distribution in the range 250 nm to 800 nm, at full-load

See image in last page

Width

74.7

Depth

1132

Claim of equivalent power

-

If yes, equivalent power (W)

-

 

 

Chromaticity coordinates

(x and y)

6000K(x:0.3180;y:0.3483)

 

 

 

 

 

Parameters for directional light sources:

Peak luminous intensity (cd)

--

Beam angle in degrees, or the range of beam angles that can be set

--

Parameters for LED and OLED light sources:

R9 colour rendering index value

≥0

Survival factor

90%

the lumen maintenance factor

96.0%

 

 

Parameters for LED and OLED mains light sources:

displacement factor (cos φ1)

≥0.7

Colour consistency in McAdam ellipses

≤6

Claims that an LED light source replaces a fluorescent light

source without integrated ballast of a particular wattage.

-

If yes then replacement claim (W)

-

Flicker metric (Pst LM)

≤1.0

Stroboscopic effect metric (SVM)

≤0.9