Product information sheet COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light sources |
||||
Supplier’s name or trade mark: |
Barrina |
|||
Supplier’s address: |
89 Princess Street,Manchester,M1 4HT,UK |
|||
Model identifier: |
INWT504014650Dc |
|||
Type of light source: |
LED |
|||
Light source cap-type: |
Connection by wire |
|||
Lighting technology used: |
LED |
Non-directional or directional: |
NDLS |
|
Mains or non-mains: |
MLS |
Connected light source (CLS): |
No |
|
Colour-tuneable light source: |
No |
Envelope: |
No |
|
High luminance light source: |
No |
|
|
|
Anti-glare shield: |
No |
Dimmable: |
No |
|
Product parameters |
||||
Parameter |
Value |
Parameter |
Value |
|
General product parameters: |
||||
Energy consumption in on-mode (kWh/1 000 h) |
10 |
Energy efficiency class |
E |
|
Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere (360°), in a wide cone (120°) or in a narrow cone (90°) |
1200lm in a sphere (360°) |
Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be set |
6500 |
|
On-mode power (Pon), expressed in W |
10 |
Standby power (Psb), expressed in W and rounded to the second decimal |
- |
|
Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal |
- |
Colour rendering index, rounded to the nearest integer, or the range of CRI values that can be set |
80 |
|
Outer dimensions without separate control gear, lighting control parts and nonlighting control parts, if any (millimetre) |
Height |
37 |
Spectral power distribution in the range 250 nm to 800 nm, at full-load |
See image in last page |
|
Width |
22 |
|
|
|
Depth |
594 |
|
|
Claim of equivalent power |
- |
If yes, equivalent power (W) |
- |
|
|
|
Chromaticity coordinates (x and y) |
6500K(x:0.3130;y:0.3370) |
|
|
|
|
Parameters for directional light sources: |
|||
Peak luminous intensity (cd) |
-- |
Beam angle in degrees, or the range of beam angles that can be set |
-- |
Parameters for LED and OLED light sources: |
|||
R9 colour rendering index value |
≥0 |
Survival factor |
90% |
the lumen maintenance factor |
96.0% |
|
|
Parameters for LED and OLED mains light sources: |
|||
displacement factor (cos φ1) |
≥0.7 |
Colour consistency in McAdam ellipses |
≤6 |
Claims that an LED light source replaces a fluorescent light source without integrated ballast of a particular wattage. |
- |
If yes then replacement claim (W) |
- |
Flicker metric (Pst LM) |
≤1.0 |
Stroboscopic effect metric (SVM) |
≤0.9 |